Steel Beam Sizes / Australia / Column Tees / 155 CT 59

155 CT 59 Steel Beam Dimensions and Properties

ASNZS Tees cut from universal columns · v2019.11

Analyze in Beam Calculator Back to Column Tees

Diagram, properties emphasis, and nearby alternatives use the selected unit system.

Units

Section diagram

155 CT 59 dimensions

Not to scale. Dimensions shown for reference.

Section properties

Symbols match the steel section finder. Imperial and metric values are shown side by side.

Property Imperial Metric
Weight 39.65 lb/ft 59.00 kg/m
Depth, d 6.14 in 156.00 mm
Flange width, bf 12.08 in 306.80 mm
tw 0.469 in 11.900 mm
tf 0.736 in 18.700 mm
Area 11.58 in² 7,470.00 mm²
Ix 25.23 in⁴ 10,500,000 mm⁴
Iy 108.11 in⁴ 45,000,000 mm⁴
Sx 4.95 in³ 81,143.74 mm³
Sy 17.90 in³ 293,350.72 mm³
Zx 9.28 in³ 152,000.00 mm³
Zy 27.22 in³ 446,000.00 mm³
rx 1.48 in 37.49 mm
ry 3.06 in 77.62 mm
J 1.92 in⁴ 799,000.00 mm⁴

Alternatives

Useful nearby sections

Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus 155 CT 59.

Lighter in Tees cut from universal columns

155 CT 48

Weight
48.0 kg/m (-19%)
Depth
153.0 mm (-1.9%)
Ix
8,420,000 mm⁴ (-20%)

Heavier in Tees cut from universal columns

155 CT 68

Weight
68.0 kg/m (+15%)
Depth
159.0 mm (+1.9%)
Ix
12,600,000 mm⁴ (+20%)

Closest Iₓ in Tees cut from universal columns

155 CT 79

Weight
79.0 kg/m (+34%)
Depth
163.0 mm (+4.5%)
Ix
15,000,000 mm⁴ (+43%)
Analyze in Beam Calculator Compare in Column Tees finder

Source: Australian-Sections.xlsx (Sheets 1-19) · v2019.11 · Methodology