Steel Beam Sizes / Australia / RHS / 50×25×3.0 RHS

50×25×3.0 RHS Steel Beam Dimensions and Properties

ASNZS Rectangular hollow sections · v2019.11

Analyze in Beam Calculator Back to RHS

Diagram, properties emphasis, and nearby alternatives use the selected unit system.

Units

Section diagram

50×25×3.0 RHS dimensions

Not to scale. Dimensions shown for reference.

Section properties

Symbols match the steel section finder. Imperial and metric values are shown side by side.

Property Imperial Metric
Weight 2.06 lb/ft 3.07 kg/m
Height 1.97 in 50.00 mm
Width 0.98 in 25.00 mm
t 0.118 in 3.000 mm
Area 0.61 in² 391.00 mm²
Ix 0.27 in⁴ 112,000.00 mm⁴
Iy 0.09 in⁴ 36,700.00 mm⁴
Sx 0.27 in³ 4,480.00 mm³
Sy 0.18 in³ 2,936.00 mm³
Zx 0.36 in³ 5,860.00 mm³
Zy 0.22 in³ 3,560.00 mm³
rx 0.67 in 16.92 mm
ry 0.38 in 9.69 mm
J 0.23 in⁴ 96,400.00 mm⁴

Alternatives

Useful nearby sections

Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus 50×25×3.0 RHS.

Lighter in Rectangular hollow sections

75×50×1.6 RHS

Weight
3.0 kg/m (-2.0%)
Depth
75.0 mm (+50%)
Ix
305,000 mm⁴ (+172%)

Heavier in Rectangular hollow sections

65×35×2.3 RHS

Weight
3.3 kg/m (+8.7%)
Depth
65.0 mm (+30%)
Ix
229,000 mm⁴ (+104%)

Closest Iₓ in Rectangular hollow sections

50×25×2.8 RHS

Weight
2.9 kg/m (-5.9%)
Depth
50.0 mm (0.0%)
Ix
107,000 mm⁴ (-4.5%)
Analyze in Beam Calculator Compare in RHS finder

Source: Australian-Sections.xlsx (Sheets 1-19) · v2019.11 · Methodology