Steel Beam Sizes / Australia / RHS / 75×50×2.3 RHS

75×50×2.3 RHS Steel Beam Dimensions and Properties

ASNZS Rectangular hollow sections · v2019.11

Analyze in Beam Calculator Back to RHS

Diagram, properties emphasis, and nearby alternatives use the selected unit system.

Units

Section diagram

75×50×2.3 RHS dimensions

Not to scale. Dimensions shown for reference.

Section properties

Symbols match the steel section finder. Imperial and metric values are shown side by side.

Property Imperial Metric
Weight 2.85 lb/ft 4.24 kg/m
Height 2.95 in 75.00 mm
Width 1.97 in 50.00 mm
t 0.091 in 2.300 mm
Area 0.84 in² 540.00 mm²
Ix 1.01 in⁴ 419,000.00 mm⁴
Iy 0.54 in⁴ 224,000.00 mm⁴
Sx 0.68 in³ 11,173.33 mm³
Sy 0.55 in³ 8,960.00 mm³
Zx 0.83 in³ 13,600.00 mm³
Zy 0.63 in³ 10,300.00 mm³
rx 1.10 in 27.86 mm
ry 0.80 in 20.37 mm
J 1.13 in⁴ 469,000.00 mm⁴

Alternatives

Useful nearby sections

Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus 75×50×2.3 RHS.

Lighter in Rectangular hollow sections

65×35×2.8 RHS

Weight
4.0 kg/m (-5.9%)
Depth
65.0 mm (-13%)
Ix
267,000 mm⁴ (-36%)

Heavier in Rectangular hollow sections

65×35×3.0 RHS

Weight
4.2 kg/m (+0.2%)
Depth
65.0 mm (-13%)
Ix
281,000 mm⁴ (-33%)

Closest Iₓ in Rectangular hollow sections

75×50×2.5 RHS

Weight
4.6 kg/m (+8.1%)
Depth
75.0 mm (0.0%)
Ix
450,000 mm⁴ (+7.4%)
Analyze in Beam Calculator Compare in RHS finder

Source: Australian-Sections.xlsx (Sheets 1-19) · v2019.11 · Methodology