Steel Beam Sizes / Australia / Unequal Angles / 75×50×6 UA
75×50×6 UA Steel Beam Dimensions and Properties
ASNZS Unequal angles · v2019.11
Diagram, properties emphasis, and nearby alternatives use the selected unit system.
Section diagram
75×50×6 UA dimensions
Not to scale. Dimensions shown for reference.
Section properties
Symbols match the steel section finder. Imperial and metric values are shown side by side.
| Property | Imperial | Metric |
|---|---|---|
| Weight | 3.78 lb/ft | 5.62 kg/m |
| Width | 1.97 in | 50.00 mm |
| Height | 2.95 in | 75.00 mm |
| t | 0.236 in | 6.000 mm |
| Area | 1.11 in² | 716.00 mm² |
| Ix | 1.12 in⁴ | 468,000.00 mm⁴ |
| Iy | 0.20 in⁴ | 83,600.00 mm⁴ |
| Zx | 0.98 in³ | 16,100.00 mm³ |
| Zy | 0.39 in³ | 6,460.00 mm³ |
| rx | 1.01 in | 25.57 mm |
| ry | 0.43 in | 10.81 mm |
| J | 0.02 in⁴ | 8,840.00 mm⁴ |
Alternatives
Useful nearby sections
Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus 75×50×6 UA.
Lighter in Unequal angles
65×50×6 UA
- Weight
- 5.2 kg/m (-8.1%)
- Depth
- 65.0 mm (-13%)
- Ix
- 338,000 mm⁴ (-28%)
Heavier in Unequal angles
65×50×8 UA
- Weight
- 6.6 kg/m (+17%)
- Depth
- 65.0 mm (-13%)
- Ix
- 421,000 mm⁴ (-10%)
Closest Iₓ in Unequal angles
75×50×5 UA
- Weight
- 4.4 kg/m (-22%)
- Depth
- 75.0 mm (0.0%)
- Ix
- 369,000 mm⁴ (-21%)
Source: Australian-Sections.xlsx (Sheets 1-19) · v2019.11 · Methodology