Steel Beam Sizes / Europe / HP-Shapes / HP 305×95

HP 305×95 Steel Beam Dimensions and Properties

EN Bearing piles · v2026.1

Analyze in Beam Calculator Back to HP-Shapes

Diagram, properties emphasis, and nearby alternatives use the selected unit system.

Units

Section diagram

HP 305×95 dimensions

Not to scale. Dimensions shown for reference.

Section properties

Symbols match the steel section finder. Imperial and metric values are shown side by side.

Property Imperial Metric
Weight 63.77 lb/ft 94.90 kg/m
Depth, d 11.96 in 303.70 mm
Flange width, bf 12.15 in 308.70 mm
tw 0.524 in 13.300 mm
tf 0.524 in 13.300 mm
Area 18.76 in² 12,100.00 mm²
Ix 480.50 in⁴ 200,000,000 mm⁴
Iy 156.88 in⁴ 65,300,000 mm⁴
Sx 80.55 in³ 1,320,000 mm³
Sy 25.81 in³ 423,000.00 mm³
Zx 89.70 in³ 1,470,000 mm³
Zy 39.54 in³ 648,000.00 mm³
rx 5.08 in 129.00 mm
ry 2.89 in 73.50 mm
J 1.92 in⁴ 800,000.00 mm⁴
Cw 5,138.98 in⁶ 1,380,000,000,000 mm⁶

Alternatives

Useful nearby sections

Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus HP 305×95.

Lighter in Bearing piles

HP 305×88

Weight
88.5 kg/m (-6.7%)
Depth
301.7 mm (-0.7%)
Ix
184,000,000 mm⁴ (-8.0%)

Heavier in Bearing piles

HP 320×103

Weight
103.0 kg/m (+8.5%)
Depth
307.0 mm (+1.1%)
Ix
220,000,000 mm⁴ (+10.0%)

Closest Iₓ in Bearing piles

HP 320×88

Weight
88.5 kg/m (-6.7%)
Depth
303.0 mm (-0.2%)
Ix
187,000,000 mm⁴ (-6.5%)
Analyze in Beam Calculator Compare in HP-Shapes finder

Source: Eurocode 3 UK National Annex and ArcelorMittal Sections 2026-1 · v2026.1 · Eurocode 3 - UK National Annex · Methodology