Steel Beam Sizes / Europe / HP-Shapes / HP 400×176

HP 400×176 Steel Beam Dimensions and Properties

EN Bearing piles · v2026.1

Analyze in Beam Calculator Back to HP-Shapes

Diagram, properties emphasis, and nearby alternatives use the selected unit system.

Units

Section diagram

HP 400×176 dimensions

Not to scale. Dimensions shown for reference.

Section properties

Symbols match the steel section finder. Imperial and metric values are shown side by side.

Property Imperial Metric
Weight 118.27 lb/ft 176.00 kg/m
Depth, d 14.17 in 360.00 mm
Flange width, bf 15.59 in 396.00 mm
tw 0.787 in 20.000 mm
tf 0.787 in 20.000 mm
Area 34.72 in² 22,400.00 mm²
Ix 1,244.50 in⁴ 518,000,000 mm⁴
Iy 497.32 in⁴ 207,000,000 mm⁴
Sx 175.75 in³ 2,880,000 mm³
Sy 64.07 in³ 1,050,000 mm³
Zx 197.72 in³ 3,240,000 mm³
Zy 97.64 in³ 1,600,000 mm³
rx 5.98 in 152.00 mm
ry 3.78 in 96.10 mm
J 7.74 in⁴ 3,220,000 mm⁴
Cw 22,268.91 in⁶ 5,980,000,000,000 mm⁶

Alternatives

Useful nearby sections

Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus HP 400×176.

Lighter in Bearing piles

HP 360×174

Weight
174.0 kg/m (-1.1%)
Depth
361.4 mm (+0.4%)
Ix
510,000,000 mm⁴ (-1.5%)

Heavier in Bearing piles

HP 305×180

Weight
180.0 kg/m (+2.3%)
Depth
326.7 mm (-9.2%)
Ix
410,000,000 mm⁴ (-21%)

Closest Iₓ in Bearing piles

HP 305×223

Weight
223.0 kg/m (+27%)
Depth
337.9 mm (-6.1%)
Ix
527,000,000 mm⁴ (+1.7%)
Analyze in Beam Calculator Compare in HP-Shapes finder

Source: Eurocode 3 UK National Annex and ArcelorMittal Sections 2026-1 · v2026.1 · Eurocode 3 - UK National Annex · Methodology