Steel Beam Sizes / Europe / SHS / SHS 50×50×4
SHS 50×50×4 Steel Beam Dimensions and Properties
EN Square hollow sections · v2026.1
Diagram, properties emphasis, and nearby alternatives use the selected unit system.
Section diagram
SHS 50×50×4 dimensions
Not to scale. Dimensions shown for reference.
Section properties
Symbols match the steel section finder. Imperial and metric values are shown side by side.
| Property | Imperial | Metric |
|---|---|---|
| Weight | 3.79 lb/ft | 5.64 kg/m |
| Height | 1.97 in | 50.00 mm |
| Width | 1.97 in | 50.00 mm |
| t | 0.157 in | 4.000 mm |
| Area | 1.11 in² | 719.00 mm² |
| Ix | 0.60 in⁴ | 250,000.00 mm⁴ |
| Iy | 0.60 in⁴ | 250,000.00 mm⁴ |
| Sx | 0.61 in³ | 9,990.00 mm³ |
| Sy | 0.61 in³ | 9,990.00 mm³ |
| Zx | 0.75 in³ | 12,300.00 mm³ |
| Zy | 0.75 in³ | 12,300.00 mm³ |
| rx | 0.73 in | 18.60 mm |
| ry | 0.73 in | 18.60 mm |
| J | 0.97 in⁴ | 404,000.00 mm⁴ |
Alternatives
Useful nearby sections
Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus SHS 50×50×4.
Lighter in Square hollow sections
SHS 60×60×3.2
- Weight
- 5.6 kg/m (-0.4%)
- Depth
- 60.0 mm (+20%)
- Ix
- 382,000 mm⁴ (+53%)
Heavier in Square hollow sections
SHS 40×40×5.6
- Weight
- 5.8 kg/m (+2.5%)
- Depth
- 40.0 mm (-20%)
- Ix
- 141,000 mm⁴ (-44%)
Closest Iₓ in Square hollow sections
SHS 50×50×3.6
- Weight
- 5.1 kg/m (-8.9%)
- Depth
- 50.0 mm (0.0%)
- Ix
- 232,000 mm⁴ (-7.2%)
Source: Eurocode 3 UK National Annex and ArcelorMittal Sections 2026-1 · v2026.1 · Hot-finished hollow sections · Methodology