Steel Beam Sizes / Australia / SHS / 89×5.0 SHS
89×5.0 SHS Steel Beam Dimensions and Properties
ASNZS Square hollow sections · v2019.11
Diagram, properties emphasis, and nearby alternatives use the selected unit system.
Section diagram
89×5.0 SHS dimensions
Not to scale. Dimensions shown for reference.
Section properties
Symbols match the steel section finder. Imperial and metric values are shown side by side.
| Property | Imperial | Metric |
|---|---|---|
| Weight | 8.39 lb/ft | 12.48 kg/m |
| Height | 3.50 in | 89.00 mm |
| Width | 3.50 in | 89.00 mm |
| t | 0.197 in | 5.000 mm |
| Area | 2.46 in² | 1,590.00 mm² |
| Ix | 4.35 in⁴ | 1,810,000 mm⁴ |
| Iy | 4.35 in⁴ | 1,810,000 mm⁴ |
| Sx | 2.48 in³ | 40,674.16 mm³ |
| Sy | 2.48 in³ | 40,674.16 mm³ |
| Zx | 3.00 in³ | 49,100.00 mm³ |
| Zy | 3.00 in³ | 49,100.00 mm³ |
| rx | 1.33 in | 33.74 mm |
| ry | 1.33 in | 33.74 mm |
| J | 7.33 in⁴ | 3,050,000 mm⁴ |
Alternatives
Useful nearby sections
Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus 89×5.0 SHS.
Lighter in Square hollow sections
75×6.0 SHS
- Weight
- 12.0 kg/m (-3.8%)
- Depth
- 75.0 mm (-16%)
- Ix
- 1,160,000 mm⁴ (-36%)
Heavier in Square hollow sections
100×5.0 SHS
- Weight
- 14.2 kg/m (+14%)
- Depth
- 100.0 mm (+12%)
- Ix
- 2,660,000 mm⁴ (+47%)
Closest Iₓ in Square hollow sections
100×3.0 SHS
- Weight
- 8.9 kg/m (-28%)
- Depth
- 100.0 mm (+12%)
- Ix
- 1,770,000 mm⁴ (-2.2%)
Source: Australian-Sections.xlsx (Sheets 1-19) · v2019.11 · Methodology