Steel Beam Sizes / Europe / HP-Shapes / HP 360×180

HP 360×180 Steel Beam Dimensions and Properties

EN Bearing piles · v2026.1

Analyze in Beam Calculator Back to HP-Shapes

Diagram, properties emphasis, and nearby alternatives use the selected unit system.

Units

Section diagram

HP 360×180 dimensions

Not to scale. Dimensions shown for reference.

Section properties

Symbols match the steel section finder. Imperial and metric values are shown side by side.

Property Imperial Metric
Weight 120.95 lb/ft 180.00 kg/m
Depth, d 14.29 in 362.90 mm
Flange width, bf 14.91 in 378.80 mm
tw 0.831 in 21.100 mm
tf 0.831 in 21.100 mm
Area 35.65 in² 23,000.00 mm²
Ix 1,273.33 in⁴ 530,000,000 mm⁴
Iy 458.88 in⁴ 191,000,000 mm⁴
Sx 178.19 in³ 2,920,000 mm³
Sy 61.63 in³ 1,010,000 mm³
Zx 201.99 in³ 3,310,000 mm³
Zy 94.59 in³ 1,550,000 mm³
rx 5.98 in 152.00 mm
ry 3.59 in 91.30 mm
J 8.82 in⁴ 3,670,000 mm⁴
Cw 20,779.35 in⁶ 5,580,000,000,000 mm⁶

Alternatives

Useful nearby sections

Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus HP 360×180.

Lighter in Bearing piles

HP 400×176

Weight
176.0 kg/m (-2.2%)
Depth
360.0 mm (-0.8%)
Ix
518,000,000 mm⁴ (-2.3%)

Heavier in Bearing piles

HP 320×184

Weight
184.0 kg/m (+2.2%)
Depth
329.0 mm (-9.3%)
Ix
423,000,000 mm⁴ (-20%)

Closest Iₓ in Bearing piles

HP 305×223

Weight
223.0 kg/m (+24%)
Depth
337.9 mm (-6.9%)
Ix
527,000,000 mm⁴ (-0.6%)
Analyze in Beam Calculator Compare in HP-Shapes finder

Source: Eurocode 3 UK National Annex and ArcelorMittal Sections 2026-1 · v2026.1 · Eurocode 3 - UK National Annex · Methodology