Steel Beam Sizes / Europe / HP-Shapes / HP 400×194

HP 400×194 Steel Beam Dimensions and Properties

EN Bearing piles · v2026.1

Analyze in Beam Calculator Back to HP-Shapes

Diagram, properties emphasis, and nearby alternatives use the selected unit system.

Units

Section diagram

HP 400×194 dimensions

Not to scale. Dimensions shown for reference.

Section properties

Symbols match the steel section finder. Imperial and metric values are shown side by side.

Property Imperial Metric
Weight 130.36 lb/ft 194.00 kg/m
Depth, d 14.33 in 364.00 mm
Flange width, bf 15.67 in 398.00 mm
tw 0.866 in 22.000 mm
tf 0.866 in 22.000 mm
Area 38.44 in² 24,800.00 mm²
Ix 1,388.65 in⁴ 578,000,000 mm⁴
Iy 557.38 in⁴ 232,000,000 mm⁴
Sx 193.45 in³ 3,170,000 mm³
Sy 70.79 in³ 1,160,000 mm³
Zx 219.08 in³ 3,590,000 mm³
Zy 108.62 in³ 1,780,000 mm³
rx 6.02 in 153.00 mm
ry 3.81 in 96.70 mm
J 10.28 in⁴ 4,280,000 mm⁴
Cw 25,173.55 in⁶ 6,760,000,000,000 mm⁶

Alternatives

Useful nearby sections

Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus HP 400×194.

Lighter in Bearing piles

HP 305×186

Weight
186.0 kg/m (-4.1%)
Depth
328.3 mm (-9.8%)
Ix
426,000,000 mm⁴ (-26%)

Heavier in Bearing piles

HP 400×213

Weight
213.0 kg/m (+9.8%)
Depth
368.0 mm (+1.1%)
Ix
639,000,000 mm⁴ (+11%)

Closest Iₓ in Bearing piles

HP 360×180

Weight
180.0 kg/m (-7.2%)
Depth
362.9 mm (-0.3%)
Ix
530,000,000 mm⁴ (-8.3%)
Analyze in Beam Calculator Compare in HP-Shapes finder

Source: Eurocode 3 UK National Annex and ArcelorMittal Sections 2026-1 · v2026.1 · Eurocode 3 - UK National Annex · Methodology