Steel Beam Sizes / Europe / IPE Sections / IPE A 200

IPE A 200 Steel Beam Dimensions and Properties

EN IPE beams · v2026.1

Analyze in Beam Calculator Back to IPE Sections

Diagram, properties emphasis, and nearby alternatives use the selected unit system.

Units

Section diagram

IPE A 200 dimensions

Not to scale. Dimensions shown for reference.

Section properties

Symbols match the steel section finder. Imperial and metric values are shown side by side.

Property Imperial Metric
Weight 12.36 lb/ft 18.40 kg/m
Depth, d 7.76 in 197.00 mm
Flange width, bf 3.94 in 100.00 mm
tw 0.177 in 4.500 mm
tf 0.276 in 7.000 mm
Area 3.64 in² 2,350.00 mm²
Ix 38.20 in⁴ 15,900,000 mm⁴
Iy 2.81 in⁴ 1,170,000 mm⁴
Sx 9.89 in³ 162,000.00 mm³
Sy 1.40 in³ 23,000.00 mm³
Zx 11.11 in³ 182,000.00 mm³
Zy 2.23 in³ 36,500.00 mm³
rx 3.24 in 82.30 mm
ry 0.88 in 22.30 mm
J 0.10 in⁴ 41,400.00 mm⁴
Cw 39.10 in⁶ 10,500,000,000 mm⁶

Alternatives

Useful nearby sections

Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus IPE A 200.

Lighter in IPE beams

IPE AA 200

Weight
18.0 kg/m (-2.2%)
Depth
196.4 mm (-0.3%)
Ix
15,300,000 mm⁴ (-3.8%)

Heavier in IPE beams

IPE 180

Weight
18.8 kg/m (+2.2%)
Depth
180.0 mm (-8.6%)
Ix
13,200,000 mm⁴ (-17%)

Closest Iₓ in IPE beams

IPE O 180

Weight
21.3 kg/m (+16%)
Depth
182.0 mm (-7.6%)
Ix
15,000,000 mm⁴ (-5.7%)
Analyze in Beam Calculator Compare in IPE Sections finder

Source: Eurocode 3 UK National Annex and ArcelorMittal Sections 2026-1 · v2026.1 · Eurocode 3 - UK National Annex · Methodology