W24 Beam Sizes and Section Properties
Compare AISC W24 wide-flange sections by weight, actual depth, flange width, moment of inertia and section modulus.
Steel Section Finder
Search or browse standard steel sections.
Showing AISC · W24 · Imperial
AISC Shapes Database v16.0 · 2,299 sections
Searches every available library and shape family. Leave the field empty to browse the filters below.
Filter by series
Showing the most relevant 75 sections.
| Designation | Weight (lb/ft) | Depth, d (in) | Flange width, bf (in) | Area (in²) | Ix (in⁴) | Sx (in³) |
|---|---|---|---|---|---|---|
| W24x370 | 370 | 28 | 13.7 | 109 | 13400 | 957 |
| W24x335 | 335 | 27.5 | 13.5 | 98.3 | 11900 | 864 |
| W24x306 | 306 | 27.1 | 13.4 | 89.7 | 10700 | 789 |
| W24x279 | 279 | 26.7 | 13.3 | 81.9 | 9600 | 718 |
| W24x250 | 250 | 26.3 | 13.2 | 73.5 | 8490 | 644 |
| W24x229 | 229 | 26 | 13.1 | 67.2 | 7650 | 588 |
| W24x207 | 207 | 25.7 | 13 | 60.7 | 6820 | 531 |
| W24x192 | 192 | 25.5 | 13 | 56.5 | 6260 | 491 |
| W24x176 | 176 | 25.2 | 12.9 | 51.7 | 5680 | 450 |
| W24x162 | 162 | 25 | 13 | 47.8 | 5170 | 414 |
| W24x146 | 146 | 24.7 | 12.9 | 43 | 4580 | 371 |
| W24x103 | 103 | 24.5 | 9 | 30.3 | 3000 | 245 |
| W24x131 | 131 | 24.5 | 12.9 | 38.6 | 4020 | 329 |
| W24x94 | 94 | 24.3 | 9.07 | 27.7 | 2700 | 222 |
| W24x117 | 117 | 24.3 | 12.8 | 34.4 | 3540 | 291 |
| W24x84 | 84 | 24.1 | 9.02 | 24.7 | 2370 | 196 |
| W24x104 | 104 | 24.1 | 12.8 | 30.7 | 3100 | 258 |
| W24x76 | 76 | 23.9 | 8.99 | 22.4 | 2100 | 176 |
| W24x62 | 62 | 23.7 | 7.04 | 18.2 | 1550 | 131 |
| W24x68 | 68 | 23.7 | 8.97 | 20.1 | 1830 | 154 |
| W24x55 | 55 | 23.6 | 7.01 | 16.2 | 1350 | 114 |
Series overview
W24 series
The W24 series groups AISC W-family shapes that share the same nominal-depth designation prefix. Weights and actual depths still vary within the series, so use the table below to compare candidates before analysis.
The AISC W24 series contains 21 published sections ranging from 55.00 to 370.00 lb/ft . Actual depths range from 23.60 to 28.00 inches, despite the shared W24 nominal designation .
- Lightest W24
- W24X55
- Highest Ix
- W24X370
- Shallowest actual depth
- W24X55
- Widest flange
- W24X370
Beam calculator
Analyze a W24 section
Select a designation above and load it into Optimal Beam for span, support and load analysis.
Source: AISC Shapes Database v16.0 · Methodology
Questions & answers
W24 FAQs
What is the W24 series?
It is the set of published AISC W shapes whose designation begins with W24. Members share a nominal-depth label but can differ in weight, actual depth and properties.
Why do actual depths differ within W24?
The number in the designation is nominal. Published overall depth varies by weight. Always use the tabulated depth for clearance and detailing.
How should I choose among W24 weights?
Compare weight, Ix, Sx, flange geometry and project constraints, then analyze finalists under the same span and loads. There is no universal “best” section.
Can I analyze a W24 section in Optimal Beam?
Yes. Select a designation above and choose Analyze to load its properties into the beam calculator.