Steel Beam Sizes / Australia / SHS / 25×3.0 SHS

25×3.0 SHS Steel Beam Dimensions and Properties

ASNZS Square hollow sections · v2019.11

Analyze in Beam Calculator Back to SHS

Diagram, properties emphasis, and nearby alternatives use the selected unit system.

Units

Section diagram

25×3.0 SHS dimensions

Not to scale. Dimensions shown for reference.

Section properties

Symbols match the steel section finder. Imperial and metric values are shown side by side.

Property Imperial Metric
Weight 1.27 lb/ft 1.89 kg/m
Height 0.98 in 25.00 mm
Width 0.98 in 25.00 mm
t 0.118 in 3.000 mm
Area 0.37 in² 241.00 mm²
Ix 0.04 in⁴ 18,400.00 mm⁴
Iy 0.04 in⁴ 18,400.00 mm⁴
Sx 0.09 in³ 1,472.00 mm³
Sy 0.09 in³ 1,472.00 mm³
Zx 0.12 in³ 1,910.00 mm³
Zy 0.12 in³ 1,910.00 mm³
rx 0.34 in 8.74 mm
ry 0.34 in 8.74 mm
J 0.08 in⁴ 33,300.00 mm⁴

Alternatives

Useful nearby sections

Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus 25×3.0 SHS.

Lighter in Square hollow sections

40×1.6 SHS

Weight
1.9 kg/m (-0.8%)
Depth
40.0 mm (+60%)
Ix
57,900 mm⁴ (+215%)

Heavier in Square hollow sections

35×2.0 SHS

Weight
2.0 kg/m (+5.4%)
Depth
35.0 mm (+40%)
Ix
45,100 mm⁴ (+145%)

Closest Iₓ in Square hollow sections

25×2.5 SHS

Weight
1.6 kg/m (-13%)
Depth
25.0 mm (0.0%)
Ix
16,900 mm⁴ (-8.2%)
Analyze in Beam Calculator Compare in SHS finder

Source: Australian-Sections.xlsx (Sheets 1-19) · v2019.11 · Methodology