Steel Beam Sizes / Australia / SHS / 35×2.0 SHS

35×2.0 SHS Steel Beam Dimensions and Properties

ASNZS Square hollow sections · v2019.11

Analyze in Beam Calculator Back to SHS

Diagram, properties emphasis, and nearby alternatives use the selected unit system.

Units

Section diagram

35×2.0 SHS dimensions

Not to scale. Dimensions shown for reference.

Section properties

Symbols match the steel section finder. Imperial and metric values are shown side by side.

Property Imperial Metric
Weight 1.34 lb/ft 1.99 kg/m
Height 1.38 in 35.00 mm
Width 1.38 in 35.00 mm
t 0.079 in 2.000 mm
Area 0.39 in² 254.00 mm²
Ix 0.11 in⁴ 45,100.00 mm⁴
Iy 0.11 in⁴ 45,100.00 mm⁴
Sx 0.16 in³ 2,577.14 mm³
Sy 0.16 in³ 2,577.14 mm³
Zx 0.19 in³ 3,090.00 mm³
Zy 0.19 in³ 3,090.00 mm³
rx 0.52 in 13.33 mm
ry 0.52 in 13.33 mm
J 0.18 in⁴ 74,100.00 mm⁴

Alternatives

Useful nearby sections

Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus 35×2.0 SHS.

Lighter in Square hollow sections

25×3.0 SHS

Weight
1.9 kg/m (-5.1%)
Depth
25.0 mm (-29%)
Ix
18,400 mm⁴ (-59%)

Heavier in Square hollow sections

30×2.5 SHS

Weight
2.0 kg/m (+2.0%)
Depth
30.0 mm (-14%)
Ix
31,600 mm⁴ (-30%)

Closest Iₓ in Square hollow sections

35×2.3 SHS

Weight
2.3 kg/m (+13%)
Depth
35.0 mm (0.0%)
Ix
49,900 mm⁴ (+11%)
Analyze in Beam Calculator Compare in SHS finder

Source: Australian-Sections.xlsx (Sheets 1-19) · v2019.11 · Methodology