Steel Beam Sizes / Australia / SHS / 65×6.0 SHS

65×6.0 SHS Steel Beam Dimensions and Properties

ASNZS Square hollow sections · v2019.11

Analyze in Beam Calculator Back to SHS

Diagram, properties emphasis, and nearby alternatives use the selected unit system.

Units

Section diagram

65×6.0 SHS dimensions

Not to scale. Dimensions shown for reference.

Section properties

Symbols match the steel section finder. Imperial and metric values are shown side by side.

Property Imperial Metric
Weight 6.80 lb/ft 10.13 kg/m
Height 2.56 in 65.00 mm
Width 2.56 in 65.00 mm
t 0.236 in 6.000 mm
Area 2.00 in² 1,290.00 mm²
Ix 1.70 in⁴ 706,000.00 mm⁴
Iy 1.70 in⁴ 706,000.00 mm⁴
Sx 1.33 in³ 21,723.08 mm³
Sy 1.33 in³ 21,723.08 mm³
Zx 1.68 in³ 27,500.00 mm³
Zy 1.68 in³ 27,500.00 mm³
rx 0.92 in 23.39 mm
ry 0.92 in 23.39 mm
J 3.05 in⁴ 1,270,000 mm⁴

Alternatives

Useful nearby sections

Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus 65×6.0 SHS.

Lighter in Square hollow sections

100×3.3 SHS

Weight
9.7 kg/m (-3.9%)
Depth
100.0 mm (+54%)
Ix
1,900,000 mm⁴ (+169%)

Heavier in Square hollow sections

75×5.0 SHS

Weight
10.3 kg/m (+1.6%)
Depth
75.0 mm (+15%)
Ix
1,030,000 mm⁴ (+46%)

Closest Iₓ in Square hollow sections

75×3.0 SHS

Weight
6.6 kg/m (-35%)
Depth
75.0 mm (+15%)
Ix
716,000 mm⁴ (+1.4%)
Analyze in Beam Calculator Compare in SHS finder

Source: Australian-Sections.xlsx (Sheets 1-19) · v2019.11 · Methodology