Steel Beam Sizes / Australia / SHS / 75×5.0 SHS
75×5.0 SHS Steel Beam Dimensions and Properties
ASNZS Square hollow sections · v2019.11
Diagram, properties emphasis, and nearby alternatives use the selected unit system.
Section diagram
75×5.0 SHS dimensions
Not to scale. Dimensions shown for reference.
Section properties
Symbols match the steel section finder. Imperial and metric values are shown side by side.
| Property | Imperial | Metric |
|---|---|---|
| Weight | 6.91 lb/ft | 10.28 kg/m |
| Height | 2.95 in | 75.00 mm |
| Width | 2.95 in | 75.00 mm |
| t | 0.197 in | 5.000 mm |
| Area | 2.03 in² | 1,310.00 mm² |
| Ix | 2.47 in⁴ | 1,030,000 mm⁴ |
| Iy | 2.47 in⁴ | 1,030,000 mm⁴ |
| Sx | 1.68 in³ | 27,466.67 mm³ |
| Sy | 1.68 in³ | 27,466.67 mm³ |
| Zx | 2.05 in³ | 33,600.00 mm³ |
| Zy | 2.05 in³ | 33,600.00 mm³ |
| rx | 1.10 in | 28.04 mm |
| ry | 1.10 in | 28.04 mm |
| J | 4.25 in⁴ | 1,770,000 mm⁴ |
Alternatives
Useful nearby sections
Same-series weight neighbors, closest Ix, and a nearby depth series when available — with percent change versus 75×5.0 SHS.
Lighter in Square hollow sections
65×6.0 SHS
- Weight
- 10.1 kg/m (-1.5%)
- Depth
- 65.0 mm (-13%)
- Ix
- 706,000 mm⁴ (-31%)
Heavier in Square hollow sections
100×3.8 SHS
- Weight
- 11.1 kg/m (+7.6%)
- Depth
- 100.0 mm (+33%)
- Ix
- 2,140,000 mm⁴ (+108%)
Closest Iₓ in Square hollow sections
75×6.0 SHS
- Weight
- 12.0 kg/m (+17%)
- Depth
- 75.0 mm (0.0%)
- Ix
- 1,160,000 mm⁴ (+13%)
Source: Australian-Sections.xlsx (Sheets 1-19) · v2019.11 · Methodology